Industrial assemblies are mainly 2 categories: mechanical assemblies and electro mechanical assemblies.
Mechanical assemblies consist of parts that are put together to perform a mechanical function, such as lenses and other non-electronic components.
Electro mechanical assemblies include products that use electronic components to perform mechanical operations, such as disk drives and motorized devices.
Mechanical assembly is a term that is sometimes used to describe the process of putting together components on an assembly line. The term may also be applied to an assembled product or part made in this way. In either case, mechanical assembly carries the connotation of putting component parts together to make a complete product or perform a function.
Mechanical assembly requires special engineering techniques to ensure cost-effective and on-time assembly of products. To design products for mechanical assembly, engineers must essentially build the product in the design and then disassemble it. By doing so, the engineer can decide the steps necessary to build the product in a logical order using assembly line technology.
Products manufactured in this manner can be easily disassembled and reassembled in remote locations. Production costs are often lowered as component parts can be created off site and assembled in the factory. These products can also be repaired easily with in-stock replacement parts. With the ability to easily take apart mechanical assemblies and reassemble them, these products can be upgraded easily.
Production Details
| Business Type | OEM& ODM Manufacturer (Custom CNC Machining Services) |
| Standard | JIS, ANSI |
| Products Range | Automobile parts,wind power generation equipment accessories,wind power generation equipment accessories, ER fluid, medical apparatus and instruments, standardization of custom, moto parts, machinery parts, lighting components, hardware accessories, electric motor products, etc |
| Agricultural machinery, electrical appliances, furniture hardware | |
| Materials | 1.Stainless Steel: SS201, SS303, SS304, SS316 etc. |
| 2.Carbon Steel: AISI 1045, 9SMnPb28 etc | |
| 3.Brass: C36000 (C26800), C37700 (HPb59), C38500(HPb58), C27200(CuZn37), C28000(CuZn40) etc. | |
| 4.Bronze:C51000, C52100, C54400, etc. | |
| 5.Iron:Grey iron and ductile iron | |
| 6.Aluminum:6061, 6063,7075,5052 etc. | |
| Machining | cleaning, turning, milling, drilling, grinding |
| Main equipments | CNC lathe, cnc milling, stamping machine, |
| automatic lathe, grinder, thread rolling machine, tapping | |
| drilling machine, bending machine, etc | |
| Measuring & testing equipments | Profile Projector, Rockwell Hardness Tester, Vickers Hardness Tester, Roughness Tester, Salt Spray Test Machine, Micrometers, height gauge, etc. |
| Accuracy | Accuracy Of Machining:+/-0.005mm |
| Accuracy Of Grinding:+/-0.005mm | |
| Surface Roughness:Ra0.8 | |
| Parallelism:+/-0.005mm | |
| Verticality:+/-0.005mm | |
| Concentricity:0.003mm | |
| Surface Treatment: | Polishing, Deburring, Chrom Plate, Ni Plated, Zine plated, Silver platinng |
| Clear anodizing, Anodizing black, Carburizing Nitriding, Heat Treatment, etc... | |
| MOQ | 1 Pcs. Depending on detailed orders. Accept order for small batches. |
| DRW Format | DWG, PDF, IGS, STEP, SLDPRT, SLDDRW, PRT, DRW, DXF, X_T, etc... |
| QC System | 100% Inspection before shipment |
| Certificate | ISO9001: 2008,TS16949,SGS Factory Audit |
| Payment Term | 30%T/T+70%T, Western Union, PayPal, L/C |
| Trade Terms | FOB,CIF,L/C |
| Lead time | 12~45 days after confirming |
| Sample Lead Time | 3-7 Working Days. We supply free sample |
| Transport Package | Full consideration of practical situation: foam/wooden box, anti-rust paper, small box and carton, etc. |
| Our Advantages | Reliable Quality |
| Competitive Price | |
| High precision, high quality, tight tolerance | |
| Continuous Improvement | |
| Defect-Free Products | |
| On-Time Delivery | |
| Customer Satisfaction | |
| Excellent After-Sales Service |
Equipment List
We has professional equipments.
| Shijin Production Machinery Equipment List | |||||||
| No. | Name | Model | Q'TY | Equipment Manufacturer | System | Size Spec./ Range of Work | Machine Accuracy |
| 1 | CNC lathe | Lynx225 | 6 | DOOSA (Korea) | FANUC | ∮200*500 (D*L) | 0.005mm |
| 2 | CNC lathe | 6132 | 4 | Shanghai SIGMA | GSK980TDb | ∮200*500 (D*L) | 0.005mm |
| 3 | CNC lathe | 6136 | 20 | Shanghai SIGMA | GSK980TDb | ∮200*500 (D*L) | 0.005mm |
| 4 | CNC lathe | 6150 | 1 | Shanghai SIGMA | GSK980TDb | ∮200*500 (D*L) | 0.005mm |
| 5 | CNC lathe | 6312 | 4 | Shanghai SIGMA | GSK980TDb | ∮200*500 (D*L) | 0.005mm |
| 6 | CNC lathe | CM-36 | 2 | Gong Tie | SYNTEC-3TA | ∮200*500 (D*L) | 0.005mm |
| 7 | CNC lathe | GT-36 | 6 | Gong Tie | SYNTEC-6TA | ∮200*500 (D*L) | 0.005mm |
| 8 | CNC lathe | GT-4000 | 2 | Gong Tie | SYNTEC-6TA | ∮200*500 (D*L) | 0.005mm |
| 9 | CNC lathe | S36 | 4 | Gong Tie | SYNTEC-21TA | ∮200*500 (D*L) | 0.005mm |
| 10 | CNC lathe | S36C | 12 | Gong Tie | SYNTEC-21TA | ∮200*500 (D*L) | 0.005mm |
| 11 | CNC lathe | S400 | 2 | Gong Tie | SYNTEC-21TA | ∮200*500 (D*L) | 0.005mm |
| 12 | CNC lathe | 6351A | 2 | Zhejiang | GSK980TDb | ∮200*500 (D*L) | 0.005mm |
| 13 | CNC lathe | 3210S | 4 | Jiangxi | GSK986TDa | ∮200*500 (D*L) | 0.005mm |
| 14 | CNC lathe | SPYDER-6C | 2 | SCANVIA | Mitsubishi | ∮200*500 (D*L) | 0.005mm |
| 15 | CNC turning & milling lathe | 4 | Juxing | WASHING | |||
| 16 | CNC precision automatic lathe(Swiss-type lathe) | STAR-20 | 9 | STAR (Japan) | FANUC | ∮20*200 (D*L) | 0.0025mm |
| 17 | CNC precision automatic lathe(Swiss-type lathe) | A20 | 2 | Citizen (Japan) | FANUC | 1000*500*530 | 0.0025mm |
| 18 | CNC machining center | CMV920 | 1 | DOOSA (Korea) | FANUC | 920*510*510 | 0.0025mm |
| 19 | CNC machining center | DNM415 | 1 | DOOSA (Korea) | FANUC | 762*435*510 | 0.0025mm |
| 20 | CNC machining center | DNM500 | 1 | DOOSA (Korea) | FANUC | 1000*500*530 | 0.0025mm |
| 21 | CNC machining center | DNM655 | 1 | DOOSA (Korea) | FANUC | 1270*670*625 | 0.0025mm |
| 22 | CNC machining center | V435 | 1 | DOOSA (Korea) | FANUC | 560*430*570 | 0.0025mm |
| 23 | CNC machining center | VA3 | 2 | TSUGAMI(Japan) | FANUC | 650*400*350 | 0.0025mm |
| 24 | CNC machining center | 850B | 2 | Jie Yong Da | FANUC | 1000*500*530 | 0.0025mm |
| 25 | CNC engraving and milling machine | JK-40M | 2 | Jin Hua | 400*600*400(L*W*H) | 0.005mm | |
| 26 | Surface grinder | M7130H | 1 | Hangzhou | 2270*1900*2300 | 0.01mm | |
| 27 | Cylindrical grinder | M1412 | 1 | Wuxi | 320*800 | 0.01mm | |
| 28 | Centerless grinder | M1040 | 1 | Wuxi | 2270*1900*2300 | 0.01mm | |
| 29 | Centerless grinder | MT1040A | 1 | Wuxi | 2270*1900*2300 | 0.01mm | |
| 30 | Hook shot blasting machine | Q372 | 1 | Wuxi | |||
| 31 | Ultrasonic Cleaner | JTM-8120AD | 1 | GTSONIC | |||
| 32 | Ultrasonic Cleaner | 1 | Zhangjiagang | ||||
| 33 | Sand blasting machine | SJK9070 | 1 | Changzhou | |||
| 34 | Vibration grinder | Large | 1 | ||||
| 35 | Vibration grinder | Small | 1 | ||||
| 36 | Laser marking machine | CT-LMG50 | 1 | Yancheng | |||
| 37 | K01 Screw Machine | TA-VFD-30A | 1 | TOPTEK | |||
| 38 | K02 Screw Machine | DL-20A | 1 | DELI | |||
| Total | 110 | ||||||
FAQ
1.Q: Are you Factory or Trade company?
A: We are professional factory,so our price is very competitive ex-factory price, and you are welcome to visit the factory.
2.Q: How about the quality of your product?
A: 100% inspection during production.
3.Q: What kinds of machining service do you have?
A: Gringing, Machining, CNC milling and turning,CNC milling, CNC
metal, grinding, stamping, casting and forging parts, assembly service.
4.Q: What material of the product can you supply?
A: Carbon Steel, Alloy Steel, Stainless Steel, Brass, Copper or according to your requirement.
5.Q: What's the delivery time?
A: For products in stock, within 5-7 days after receiving your payment. For custom order, about 20-35 days after confirmed every details.
6.Q: What's your packing?
Full consideration of practical situation: foam/wooden box, anti-rust paper, small box and carton, etc.
7.Q: What about the warranty?
A: We are very confident in our products, and we pack them very well with
PE Foam and carton box+wood pallet to make sure the goods in well protection.
8.How to order High Precision OEM and Customized Machining Parts for Industrial Machinery ?
* You send us drawing or sample
* We carry through project assessment
* We give you a design
* You think the design is ok
* We make the sample and send it to you
* You think the sample is good then place an order and pay us 30% deposit
* We start to make the product
9.Do you provide customized Machining parts?
Yes. Customers give us drawings and specifications, and we will manufact accordingly.
