(1) According to the part loading and positioning method:

Each part has different structural shapes,

and the technical requirements of each surface are also different.

Therefore, the positioning methods are different when processing,

so the process can be divided according to different positioning methods;

 

(2) According to the rough and fine processing division process:

According to the processing precision, stiffness and deformation of the parts,

the process can be divided according to the principle of coarse and fine machining,

that is, roughing and finishing, at this time Can be processed

with different machine tools or different tools;

 

(3) According to the tool division process:

In order to reduce the tool change time, compress the idle time and reduce

the unnecessary positioning error, the parts can be processed

according to the tool centralized process, that is,

in one setup, use a tool as much as possible.

Machining the parts that may be processed,

and then replacing the other parts with another knife;

Welcome to contact me regarding machined parts , thank you .

Angela Yao

Sales Manager

Changzhou Shijin Precision Machinery Co.,Ltd.

Address: F1, Building B3, Hutang Science and Technology Industrial Park Industrial Workshop, Changzhou, Jiangsu, China 

Postcode: 213162

Tel: 86-519-83989900-8005

Fax: 86-519-83811100

Cell: (0) 13861166733

Email: angela@czshijin.com

Wechat: 13861166733

Company website: http://www.czshijin.com/